01453 548128
TO INSTALL THIS SOFTWARE UPGRADE, YOU WILL NEED TO SUPPLY THE PRODUCT KEY FOR CAMERA CONTROL PRO VER.1 WHEN PROMPTED.
This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.
Main Features
- Most settings of Nikon digital SLRs, that are connected via USB cables, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
- In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
- Enhanced viewer function enables thumbnail display of images stored in a computer.
Compatible with the new functions of the Nikon D3/D300
- Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
- Supporting the LiveView mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
- It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
- 51-point AF can be controlled and displayed.
- Fine tuning of the new white balance is available.
Integration with other Nikon software
- Support for ViewNX browser and viewer software
- Support for Capture NX photo-finishing software
| Compatible Nikon digital SLRs | |
| D3, D300 | Supports wired or wireless LAN when used with Wireless Transmitter WT-4. |
|---|---|
| D2 series (D2H, D2X, D2HS, D2XS) D1 series (D1, D1H, D1X | D2X/D2HS/D2XS support wireless LAN when used with the WT-2. Windows Vista support currently not available Intel Mac: only Mac OS 10.4.9 supported |
| D200, D100, D80, D70 series (D70, D70S), D50, D40 series (D40, D40X) | D200 supports wired or wireless LAN when used with the WT-3. |
System Requirements
[Windows]
| CPU | 1 GHz or higher Intel Celeron/Pentium 4/Core series | |
| OS | Pre-installed versions of Windows Vista (Home Basic/Home Premium/Business/Enterprise/Ultimate) Windows XP Home Edition/Professional (SP2), Windows 2000 Professional (SP4) | |
| RAM | 256 MB or more (512 MB or more with Windows Vista), 768 MB or more recommended | |
| Hard disk | Requires 1 GB or more for running | |
| Monitor | 1,024 x 768 pixels or more 24-bit colour (True Color) or more |
|
| Interface* | USB: Only built-in USB ports supported IEEE 1394: Only OHCI-compliant boards supported |
|
| Miscellaneous |
|
|
[Macintosh]
| CPU | 1 GHz or higher Power PC G4/G5, Intel Core series/Xeon series | |
| OS | Mac OS X 10.3.9, 10.4.10 | |
| RAM | 256 MB or more (768 MB or more recommended) | |
| Hard disk | Requires 1 GB or more for running | |
| Monitor | 1,024 x 768 pixels or more 24-bit colour (True Color) or more |
|
| Interface* | USB: Only built-in USB ports supported Firewire: Only Firewire ports supported |
|
| Miscellaneous |
|
|
* Operation when connected with USB hub or Firewire hub is not guaranteed.
